N-0751M
The N-0751M is best suited for medium plus residential
use; it will run 2-3 showers at the same time without ever running out of hot water. It provides an endless supply of hot water with high efficiency and low emissions. The heater is compact and saves energy. Its valve system maintains a constant temperature while the digital control panel allows for precise control of the water temperature.


SPECIFICATIONS

Install location: Indoor/ Outdoor, Wall Hanging
Air Supply/Exhaust: Power Vented
Ignition: Direct Ignition
Operating Pressure: 15-150 PSI
Minimum Flow Rate: 0.5 GPM
Dimensions: 23.6"(Height) x 13.8"(Width) x 9.4"(Depth)
Weight: 47 lbs.
Water Holding Capacity: 0.2 Gallon
Connection Sizes:
      Water Inlet - 3/4"
      Hot Water Outlet - 3/4"
      Gas Inlet - 3/4"
Power Supply: 120 VAC (60Hz)
Power Consumption:
      NG : 62W
      LP : 75W
      Freeze Prevention 145W
Materials:
      Casing - Zincified Steel Plate/Acryl Coating
      Flue Collar - Stainless Steel
      Heat Exchanger - Copper Sheeting, Copper Tubing
Safety Devices:
      Flame Rod, Thermal Fuse, Lightning Protection
      Device (ZNR), Electric Leakage Prevention Device
      (GFCI), Overheat Prevention Device, Freezing
      Prevention Device, Fan Rotation Detector
Accessories:
      Remote Controller, Remote Controller Cord,
      Anchoring Screws


PERFORMANCE

Gas Consumption:
Maximum Performance-NG & LP:199,900 btuh,
Minimum Performance-NG & LP:12,000 btuh
Maximum Hot Water Capacity: AT 45°F Rise - 7.5 Gal./min.
Capacity Range: 0.5-9.2 Gal./min.
Temperature Settings:
  100-150°F (In 5°F intervals),
  160, 170, 180 °F (14 Options)
Default Temperature Options:
  120, 130, 140, 180 °f
  (Original is 120°F)